New Study Series

New Study Series

Last Updated on February 13, 2021 by Jaron Davis

Come along with me as I start a new journey to earn the CCNP Collaboration Certification. I will be studying and blogging about my studies for the CLCOR 350-801 and welcome you to learn with me.

In a little over a month I will finally wrap up a degree that I’ve spent the past few years working towards and with that my educational goals are beginning to shift. Believe it or not, despite my current career, all my experience, and everything I write about, I am actually NOT certified.

But before taking the test, I must first study, and I’d welcome you to come along with me on that journey. Doctors utilize the method of see one, do one, teach one. My method, drawing from that but applying here, will be to learn about a topic, lab it as best I can to confirm my knowledge, then blog about it.

Here are the topics for the CCNP and CCIE Collaboration Core Exam (CLCOR 350-801)

1.0 Infrastructure and Design | 20%
  • 1.1 Describe the key design elements of the following, pertaining to the Cisco Collaboration architecture as described in the SRND/PA
    • 1.1.a Licensing (Smart, Flex)
    • 1.1.b Sizing
    • 1.1.c Bandwidth
    • 1.1.d High availability
    • 1.1.e Disaster recovery
    • 1.1.f Dial plan
    • 1.1.g Security (certificates, SRTP, TLS)
    • 1.1.h QoS
  • 1.2 Describe the purpose of Edge devices in the Cisco Collaboration architecture such as Expressway and Cisco Unified Border Element
  • 1.3 Configure these network components to support Cisco Collaboration solutions
    • 1.3.a DHCP
    • 1.3.b NTP
    • 1.3.c CDP
    • 1.3.d LLDP
    • 1.3.e LDAP
    • 1.3.f TFTP
    • 1.3.g Certificates
  • 1.4 Troubleshoot these network components in a Cisco Collaboration solution
    • 1.4.a DNS (A/AAA, SRV, Reverse Pointer Record (PTR))
    • 1.4.b NTP
    • 1.4.c LDAP integration on Cisco Unified Communications Manager
  • 1.5 Explain these components to support Cisco Collaboration solutions
    • 1.5.a SNMP
    • 1.5.b DNS
2.0 Protocols, Codecs, and Endpoints | 20%
  • 2.1 Troubleshoot these elements of a SIP conversation
    • 2.1.a Call set up and tear down
    • 2.1.b SDP
    • 2.1.c DTMF
  • 2.2 Identify the appropriate collaboration codecs for a given scenario
  • 2.3 Configure codec negotiations
  • 2.4 Deploy SIP endpoints
    • 2.4.a Manual
    • 2.4.b Self provisioning
    • 2.4.c Bulk Administration Tool (BAT)
  • 2.5 Troubleshoot collaboration endpoints
3.0 Cisco IOS XE Gateway and Media Resources | 15%
  • 3.1 Configure these voice gateway elements
    • 3.1.a DTMF
    • 3.1.b Voice translation rules and profiles
    • 3.1.c Codec preference list
    • 3.1.d Dial peers
  • 3.2 Configure ISDN PRI/BRI
  • 3.3 Troubleshoot ISDN PRI/BRI
  • 3.4 Configure and verify the MGCP
  • 3.5 Identify the appropriate media resources for a given scenario (hardware and software)
4.0 Call Control | 25%
  • 4.1 Describe the Cisco Unified Communications Manager digit analysis process
  • 4.2 Implement toll fraud prevention on Cisco Unified CM
  • 4.3 Configure globalized call routing in Cisco Unified CM
    • 4.3.a Route patterns (traditional and +E.164 format)
    • 4.3.b Translation patterns
    • 4.3.c Standard local route group
    • 4.3.d Transforms
    • 4.3.e SIP route patterns
  • 4.4 Describe Mobile and Remote Access (MRA)
5.0 QoS | 10%
  • 5.1 Describe problems that can lead to poor voice and video quality
    • 5.1.a Latency
    • 5.1.b Jitter
    • 5.1.c Packet loss
    • 5.1.d Bandwidth
  • 5.2 Describe the QoS requirements for these application types (voice and video)
  • 5.3 Describe the class models for providing QoS on a network
    • 5.3.a 4/5 Class model
    • 5.3.b 8 Class model
    • 5.3.c QoS Baseline model (11 Class)
  • 5.4 Describe the purpose and function of these DiffServ values as it pertains to collaboration
    • 5.4.a EF
    • 5.4.b AF41
    • 5.4.c AF42
    • 5.4.d CS3
    • 5.4.e CS4
  • 5.5 Describe QoS trust boundaries and their significance in LAN-based classification and marking
  • 5.6 Describe and determine location-based CAC bandwidth requirements
  • 5.7 Configure and verify LLQ (class map, policy map, service policy)
6.0 Collaboration Applications | 10%
  • 6.1 Configure Cisco Unity Connection mailbox and MWI
  • 6.2 Configure Cisco Unity Connection SIP integration options to call control
  • 6.3 Describe Cisco Unity Connection call handlers
  • 6.4 Describe Cisco Unified IM&P protocols and deployment
    • 6.4.a XMPP
    • 6.4.b High availability
  • 6.5 Deploy Cisco Jabber on premises

References

https://learningnetwork.cisco.com/s/clcor-exam-topics

This Post Has One Comment

  1. Chris

    Just ran across your Blog while searching for info about the new 988 Suicide Prevention Hotline. Very interesting topic as I am looking to get my CCNP Collab as well. I will definitely be following your journey!

Leave a Reply